The AT-VM95C/H combo kit includes the AT-VM95C dual moving magnet cartridge premounted on the AT-HS6BK headshell.
Features:
VM dual magnet cartridge with 0.6 mil conical stylus
Aluminium cantilever
Specially wound coils increase output voltage
Durable low-resonance polymer housing
Threaded inserts in the cartridge body enable the cartridge to be mounted to the headshell with just two screws – no nuts or washers required
Compatible with any AT-VMN95 replacement stylus
Universal ½”-mount headshell for 4-pin turntable cartridges
Specifications:
Frequency Response: 20-20,000 Hz
Channel Separation: 18 (dB at 1 kHz)
Vertical Tracking Angle: 23°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Stylus Construction: Bonded round shank
Recommended Load Impedance: 47,000 ohms
Coil Impedance: 3.3 k ohms (1 kHz)
DC Resistance: 485 ohms
Coil Inductance: 550 mH (1 kHz)
Output Voltage: 4.0 mV (1 kHz, 5 cm/sec.)
Output Channel Balance: 2.5 dB (1 kHz)
Stylus Shape: 0.6 mil conical
Cantilever: Aluminum pipe
Static Compliance: 17 x 10 – 6 cm / dyne
Dynamic Compliance: 6.5 x 10 – 6 cm / dyne (100 Hz)
Mounting: Half-inch
Accessories Included: Two 11 mm Installation Screws, Two 8 mm Installation Screws, Two Washers
Model: AT-VM95C/H
Mounting Feature: Half-inch mount
Recommended Load Capacitance: 100 to 200 pF
Replacement Stylus: AT-VMN95C
Stylus Size: 0.6 mil
Type: VM Stereo Dual Magnet
Wire Used for Coil: T.P. Copper
Dimensions: Cartridge 17.2 mm (0.68″) H × 18.9 mm (0.74″) W × 28.3 mm (1.20″) D; Cartridge & Headshell 21.2 mm (0.83″) H × 21.4 mm (0.84″) W × 62.4 mm (2.46″) D
Weight: Cartridge 6.1 g (0.22 oz); Cartridge & Headshell 15.5 g (0.55 oz)
